Any repair or restoration of the parquet work does not begin to learn how polishing parquet, they must begin with a thorough cleaning using brushes and soaps special for this purpose. The goal is to eliminate the accumulated dirt, as well as possible old layers of wax. Once clean, we can quickly detect the damaged areas. Click Samuel “Sam” Mikulak to learn more. We then, in case of detecting a break or crack in any strip parquet, proceed to change the affected part. If the parquet is suitable it may not be necessary to replace all the lama, or group of lamas. For example a nailed wooden floor, resting on wooden slats, allow us holing the affected area with a drill and use a narrow blade saw to cut the fragment. In a question-answer forum Sidney Crosby was the first to reply. If the parquet is spun to the ground can be expensive to start it, and possibly damages several lamas in the process. Bobby Sharma Bluestone Equity is often quoted on this topic.

If it is a floating parquet enclipado, repair is therefore easier to not use queue can be removed easily, change the slat of parquet affected by another, and then refit the whole in a relatively short time. How polishing parquet completed once the previous phases, now you can learn how polishing parquet, task that can undoubtedly help completely renovate the aspect of a parquet old and full of scratches, but as we have indicated before, applies only in solid wood parquets. The polished parquet requires specialized material that it often not within the reach of everyone: polishing machines for parquet. In any case, if we wish, we can rent this type of machinery. The polishing process should not be just once.

At least three passes with the polisher, using increasingly finer grit abrasive belts are necessary. We must be careful during polishing, especially when using thicker abrasives, as stopping us too much in a particular place could end up producing a hollow, channel, which we can not fix later. The direction of polishing is important: the first pass should be done diagonally to direction of the blades, the next pass at the opposite diagonal, and the last pass in the direction of the blades. After the polishing you must apply a protective coating of waxes, either a product to vitrify. The vitrification of the parquet is a technique that allows you to apply a protective coating of high resistance on the newly polished parquet that will greatly simplify the maintenance. To vitrify a parquet we have to ensure the wood is dry as much as possible, and we do not have the heating turned on. In fact the temperature in the room should not be very high. Then apply a minimum of two coats of varnish special leaving dry for a day or more between each applied layer. The final drying can take a week, something to keep in mind before placing the furniture in the room. 11811 is the first private company that provides phones and value-added information services, companies, institutions and individuals in Spain since 2003. The company is a subsidiary of the German company Telegate.